先换高频头,可换后还是老样子. 随便在L段选一个台,测高频头频段切换端子VL上的电压,只有8V,查LA7910的(9)脚供电电压为12V正常,换LA7910,故障排除. |
|小黑屋|最新贴|维修网
( 粤ICP备09047344号 ) 
GMT+8, 2025-5-15 05:53 , Processed in 0.439548 second(s), 25 queries .
Powered by Discuz! X3.4
Copyright © 2001-2021, Tencent Cloud.
