1:Logicaln scanning 逻辑扫描 1.1|------------------------------------------ | | initial LBA position:x | | 开始位置 | | final LBA position:xxxxxxxx | | 结束位置 | | reversive scanning:on | | 反向扫描打开关闭 | | number of passes:3 | | 通过的次数 | | perform writing test:on | | 执行写测试打开关闭 | | verif. instead of reading | | 读版本代替 | | put defects to:p-list | | 放置默认列表 | | | |------------------------------------------| 2:disc firmware zone 固件地区 2.1 work with momeory buffer 操作存储缓冲器 2.1.1 memory buffer reading 存储缓冲器读 2.1.2 memory buffer writing 存储缓冲器写 2.2 work with sa 操作sa 2.2.1 checking of disc fw structure 检查盘片固件结构 2.2.2 sa surface checking sa表面检查 2.2.3 reading of the modules 读那个模块 2.2.4 writing of modules 写那个模块 2.2.5 reading modules groups 读全部模块 2.2.6 writing modules groups 写全部模块 2.2.7 sa write test sa写测试 2.2.8 modules repairing 模块修理 2.2.9 transltor regeneration 扇区再生 2.2.10 spindle stop 主轴停转 2.3 LDR-file loading 加载ldr文件 2.4 LDR-file creation 制造ldr文件 2.5 security subsystem 安全系统 3: disc id 盘片id号 4: defects table 缺陷表 4.1 view p-list 查看p-list 4.2 view g-list 查看g-list 4.3 move g-list defects to p-list 转移g表到p表 4.4 erase g-list 擦除g-list 4.5 erase g-list and p-list 擦除g-list和p-list 4.6 import from defectoscope 引入探测器 5: selfscan 自检 5.1 start selfscan 开始自检测试 5.2 stop selfscan 暂停自检测试 5.3 view selfscan state 查看自检测试状态 6: exit 退出 |
